Fluid pumps
Certified to complete Warranty Work, Sell, Install and Maintain Fluid Pumps by Balcrank
Lynx 1:1 – Stainless Steel
Specs
part # 1110-010
Piston Pumps - LYNX
The Lynx series pumps are designed for lower volume applications of synthetic and petroleum oils. Choose the 1:1 Stainless Steel pump for anti-freeze and windshield wash applications. They are excellent choices for tank packages, single dispense applications, oil bars, and portable units. Their modular design is easy to maintain and a cost-effective solution for the lower volume or entry level customer
Operating air pressure
45 -150 psi (3 -10 bar)
Cycles per gallon
31 cyc/gal (8.2 cyc/liter)
Air consumption 100 psi (7 bar) & 3 gal/min (11 l/min)
3.50 SCFM
Max Fluid stall pressure @ 150 psi (10 bar) (1)
145 psi (10 bar)
Effective Air Piston Diameter
1.375” (35 mm)
1110-010, 1110-009 Free flow pump delivery with SAE 10W30 oil, 68º F (20º C), 150 psi (10 bar) air pressure
10.6 gal/min (40 l/min)
1160-008 Free flow pump delivery with SAE 10W30 oil, 68º F (20º C), 150 psi (10 bar) air pressure
8.2 gal/min (30 l/min)
Air inlet
1/4” NPT(F)
Fluid inlet (stub only)
1” NPT(F)
Fluid outlet 1110-010, 1110-009
3/4” NPT(F)
Fluid outlet 1160-008
3/4” NPT(F)
Wetted materials 1110-010, 1110-009
Steel, Brass, Aluminum, Buna-N™, and Polyurethane
Wetted materials 1160-008
Stainless Steel, Viton, and PTFE
Service Bulletin 1110-010, 1110-009
SB 1102
Service Bulletin 1160-008
SB 1143
Lynx 3:1 pump
Specs
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Anti-freeze/windshield wash fluids
part # 1110-007
Piston Pumps - LYNX
The LYNX 3:1 ratio double-acting pump is engineered for outstanding performance and reliability to dispense lubricating oils and similar products.
The LYNX® series pump is perfect for small-volume users, for synthetics, and for standard mineral oils. The 3:1 version is best for small tank packages, and roll-around units for synthetic and mineral base drum applications.
Operating air pressure
45 -150 psi (3 -10 bar)
Cycles per gallon
98 cyc/gal (26.5 cyc/liter)
Air consumption 100 psi (7 bar) & 3 gal/min (11 l/min)
18.80 SCFM
Max Fluid stall pressure @ 150 psi (10 bar) (1)
725 psi (50 bar)
Effective Air Piston Diameter
1.375” (35 mm)
Free flow pump delivery with SAE 10W30 oil, 68º F (20º C), 150 psi (10 bar) air pressure
6.6 gal/min (25 l/min)
Air inlet
1/4” NPT(F)
Fluid inlet
3/4” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Buna-N™, Steel, Brass, Aluminum, and Polyurethane
Service Bulletin
SB 1101
Lynx 5:1 hd pump
Specs
part # 1110-012
part # 1130-016
Piston Pumps - LYNX
The LYNX®5:1 HD ratio double-acting pump is engineered for outstanding performance and reliability. The LYNX® 5:1 HD pump is designed to dispense lubricating oils and gear oils in piped systems up to SAE 90.
The LYNX® 5:1 HD series pump is perfect for medium-volume users requiring an economy unit for roll-around synthetics, gear oil, and standard mineral oil dispense packages. This pump can also be used for small to medium shops supplying overhead hose reels with a maximum overall flow rate of 5 gpm.
Operating air pressure
60-145 psi (4-10 bar)
Cycles per gallon
20 cyc/gal (5.28 cyc/liter)
Air consumption 100 psi (7 bar) & 3 gal/min (11 l/min)
18.80 SCFM
Max Fluid stall pressure @ 150 psi (10 bar) (1)
725 psi (50 bar)
Effective Air Piston Diameter
3” (80 mm)
Free flow pump delivery with SAE 10W30 oil, 68º F (20º C), 150 psi (10 bar) air pressure
24 gal/min (90.85 l/min)
Air inlet
1/4” NPT(F)
Fluid inlet
1” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Aluminum, Buna-N™, Zamak, Steel, and Polyurethane
Service Bulletin
SB 1128
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
fluids handled
panther hp 3:1 pump
Specs
part # 1130-015
Piston Pumps - Panther
The Panther HP 3:1 double acting pump is engineered for outstanding performance and reliability for dispensing lubricating oils and similar products up to SAE 90.
Pride Series pumps are manufactured with a mechanical air valve and piston design which is more forgiving to environments with contaminated air. The 3:1 version is a medium pressure pump for supplying higher volume than the 5:1 version but at lower operating pressures ideal for medium pumping distances and overall flow rates of 4-5 gpm.
Operating air pressure
10-150 psi (.7-10 bar)
Cycles per gallon
34 cyc/gal (8.98 cyc/liter)
Air consumption 100 psi (7 bar) & 4 gal/min (15 l/min)
19.70 SCFM
Max. fluid stall pressure @ 150 psi (10 bar) (1)
490 psi (33.7 bar)
Effective air piston diameter
2.5” (63.5 mm)
Free Flow pump delivery with SAE 10W30 oil, 68º F (20º C), 100 psi (7 bar) air pressure
8 gal/min (30 l/min)
Operating air pressure
10-150 psi (0.7-10 bar)
Cycles per gallon
57 cyc/gal (15.06 cyc/liter)
Air consumption 100 psi (7 bar) & 4 gal/min (15 l/min)
24.80 SCFM
Max fluid stall pressure @ 150 psi (10 bar) (1)
760 psi (52 bar)
Effective air piston diameter
2.5” (63.5 mm)
Free Flow pump delivery with SAE 10W30 oil, 68º F (20º C), 100 psi (7 bar) air pressure
6 gal/min (30 l/min)
Air inlet
1/4” NPT(F)
Fluid inlet
1” NPT(F); 1 1/2” NPT(M)
Fluid outlet
3/4” NPT(F)
Wetted materials
Steel, Nickel Plated Steel, Stainless Steel, Aluminum, Ultrathane, Buna-N™, and Nylon
Service Bulletin
SB 1064
Specs
Air inlet
1/4” NPT(F)
Fluid inlet
1” NPT(F); 1 1/2” NPT(M)
Fluid outlet
1/2” NPT(F)
Wetted materials
Steel, Nickel Plated Steel, Stainless Steel, Aluminum, Ultrathane, Buna-N™, and Nylon
Service Bulletin
SB 1064
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
panther hp 5:1 pump
fluids handled
Piston Pumps - Panther
The Panther HP 5:1 ratio double acting pump is engineered for outstanding performance and reliability for dispensing lubricating oils and similar products up to SAE 90.
Pride Series pumps are manufactured with a mechanical air valve and piston design which is more forgiving to environments with contaminated air. The 5:1 version is a medium pressure pump for supplying higher pressures and for longer pumping distances than the 3:1 version but at lower volume ideal for longer pumping distances and overall flow rates of 4 gpm.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
part # 1130-019
Operating air pressure
40-150 psi (3-10 bar)
Cycles per gallon
31 cyc/gal (8.2 cyc/liter)
Air consumption 100 psi (7 bar) & 8 gal/min (30 l/min)
59 SCFM
Max fluid stall pressure @ 150 psi (10 bar) (1)
870 psi (60 bar)
Effective Air Piston Diameter
3.2” (81 mm)
Free flow pump delivery with SAE 10W30 oil, 68º F (20º C), 100 psi (7 bar) air pressure
16 gal/min (61 l/min)
Specs
Air inlet
3/8” NPT(F)
Fluid inlet
1” NPT(F); 1 1/2” NPT(M)
Fluid outlet
3/4” NPT(F)
Wetted materials 1130-019 - 1130-025 - 1130-026
Carbon steel, Buna-N™, Stainless Steel, Ultrathane®, and Aluminum.
Wetted materials 1160-007
Stainless Steel and Viton®
Service Bulletin
SB 1065
Tiger HP 6:1 Pump
Piston Pumps - Tiger
The Tiger® HP 6:1 ratio double acting pump is engineered for outstanding performance and reliability for dispensing lubricating oils and similar products up to SAE 90.
Tiger® is the largest of the Pride series pumps. Pride series pumps are manufactured with a mechanical air valve and piston design which is more forgiving of environments with contaminated air. The 6:1 version is a medium pressure pump for suppling higher pressures and longer pumping distances. The larger 3.2” air motor makes this pump ideal for larger users who need higher flow rates and slower pump cycle rates.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Anti-freeze/windshield wash fluids
Gear oil
part # 1430-001
Operating air pressure
30 to 180 psi (2 to 12.4 bar)
Cycles per gallon
6
Air Consumption (1)
28 CFM (800 Nl/min)
Max fluid outlet pressure (3)
510 psi (36 bar)
Air motor effective diameter
4.5” (115 mm)
Air motor stroke
4” (100 mm)
Delivery at 80 cpm
12 gal/min (45 l/min)
Max free flow delivery
32 gal/min (120 l/min)
Specs
Air inlet
1/2” NPT(F)
Fluid inlet
1 1/2” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Steel, Hard Chromed Steel, Zinc Plated Steel, Stainless Steel, Cast Iron, Polyurethane, Buna-N™, Bronze Filled PTFE
Noise level (2)
80 dB
Service Bulletin
SB 1134
lion 450 - 3:1 pump
Piston Pumps - Lion
Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump is recommended for medium pumping distances.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
part # 1430-002
Operating air pressure
30 to 180 psi (2 to 12.4 bar)
Cycles per gallon
11
Air Consumption (1)
29 CFM (830 Nl/min)
Max fluid outlet pressure (3)
1,020 psi (72 bar)
Air motor effective diameter
4.5” (115 mm)
Air motor stroke
4” (100 mm)
Delivery at 80 cpm
7 gal/min (25 l/min)
Max free flow delivery
26 gal/min (98 l/min)
Specs
Air inlet
1/2” NPT(F)
Fluid inlet
1 1/2” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Cast Iron, Hard Chromed Steel, Steel, Polyurethane Buna-N™ and Zinc
Noise level (2)
80 dB
Service Bulletin
SB 1135
lion 450 - 6:1 Pump
Piston Pumps - Lion
Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. Medium/high pressure pump is recommended for longer pumping distances.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
part # 1430-003
Operating air pressure
30 to 180 psi (2 to 12.4 bar)
Cycles per gallon
19
Air Consumption (1)
30 CFM (850 Nl/min)
Max fluid outlet pressure (3)
1,700 psi (120 bar)
Air motor effective diameter
4.5” (115 mm)
Air motor stroke
4” (100 mm)
Delivery at 80 cpm
4 gal/min (15 l/min)
Max free flow delivery
18 gal/min (68 l/min)
Specs
Air inlet
1/2” NPT(F)
Fluid inlet
1 1/2” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Cast iron, Hard Chromed Steel, Steel, Polyurethane, Buna-N™, and Zinc
Noise level (2)
80 dB
Service Bulletin
SB 1136
lion 450 - 10:1 pump
Piston Pumps - Lion
High pressure pump for oil systems where medium volume dispensing using simultaneous dispense points is required. High pressure pump is recommended for long pumping distances and/or cold weather applications
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
part # 1430-005
Operating air pressure
30 to 175 psi (2 to 12 bar)
Cycles per gallon
6
Air Consumption (1)
39 CFM (1,100 Nl/min)
Max fluid outlet pressure (3)
1,020 psi (72 bar)
Air motor effective diameter
6” (150 mm)
Air motor stroke
4” (100 mm)
Delivery at 60 cpm
9 gal/min (35 l/min)
Max free flow delivery
26 gal/min (100 l/min)
Specs
Air inlet
1/2” NPT(F)
Fluid inlet
1 1/2” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Cast Iron, Aluminum, Nickel, Steel, Polyurethane, Buna-N™, and Zinc
Noise level (2)
80 dB
Service Bulletin
SB 1137
lion 600 - 6:1 Pump
Piston Pumps - Lion
Medium/high pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump operates at slow cycle rates for high volume applications. Medium/high pressure pump is recommended for longer pumping distances.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
part # 1430-006
Operating air pressure
30 to 180 psi (2 to 12.4 bar)
Cycles per gallon
11
Air Consumption (1)
41 CFM (1,150 Nl/min)
Max fluid outlet pressure (3)
2,040 psi (144 bar)
Air motor effective diameter
6” (150 mm)
Air motor stroke
4” (100 mm)
Delivery at 60 cpm
5 gal/min (20 l/min)
Max free flow delivery
17 gal/min (65 l/min)
Specs
Air inlet
1/2” NPT(F)
Fluid inlet
1 1/2” NPT(F)
Fluid outlet
3/4” NPT(F)
Wetted materials
Cast Iron, Hard Chromed Steel, Steel, Polyurethane, and Buna-N™
Noise level (2)
80 dB
Service Bulletin
SB 1138
lion 600 - 12:1 Pump
Piston Pumps - Lion
High pressure pump and high-volume, can be used with simultaneous dispense points. This pump operates at slow cycle rates for large shops requiring long pumping distances and applications when cold weather or low air pressure could limit pump performance.
fluids handled
Hydraulic fluid
Synthetic and mineral based lubricants
Transmission fluid
Gear oil
AODD-ConventionalThe Balcrank conventional AODD pump offer volume delivery at low air pressures and easy self-priming. Models are designed specifically for transfer of light viscosity fluids, synthetic, mineral, water based products, solvents, antifreeze, windshield wash solvent, and used petroleum products.
Tank Packages
Oil Marketer’s need quick and easy to install solutions for self-contained bulk oil tank packages. Whether you are looking for complete or tank-less packages, Balcrank has combined our best pump, hose reel, and control handles into complete tank packages. Tank packages ship completely assembled requiring only an airline hook-up and oil to begin pumping. Balcrank offers UL 142 rated tanks from 275 to 500 gallons in both single and double wall options. Tank-less packages contain the same equipment excluding the tank, for customers who have local access to tanks.
Lightweight Double Wall Tank Packages
These packages are suitable for storage and dispensing of DEF, diesel and biofuels, motor oil and ATF or similar products up to SAE 90. All tank packages are double-wall with 4x 2” bung openings. Balcrank offers UL 2258* rated tanks from 165 to 400 gallons in double wall options. Tank-less packages contain the same equipment excluding the tank, for customers who have local access to tanks.
*As with all tanks, be sure to follow local and state guidelines for tank placement and installation. Some cities and counties have not approved the UL 2258 certification, as it is different that the familiar UL142 that pertains to steel tanks, so be sure to check with your local Fire Marshal and/or city and county regulations before ordering.
Signature™ Series Hose Reels
The Balcrank “Signature Series” family of hose reels are built for the toughest environments and applications. Throughout the Signature Series, quality, dependability and innovative features are first and foremost.
Control Handles
Control handles endure the abuse of being dropped, bumped, jarred, and sometimes, even run over. From mechanical to digital, pistol grip to in-line, preset, and standard, Balcrank has you covered. Balcrank offers a full range of control handles for any application. All handles are designed with shock resistant, high impact nylon shrouds.
Fluid Inventory Control
Balcrank has the right fluid inventory control product for every application.
INTRODUCING NEX·U·® Fluid Monitoring Systems
NEX·U·® provides you with the control and the information you require to make your operation more profitable. You will be able to account for every drop of lubricant and other service fluids used.Synergy is the ultimate in Fluid Inventory Control systems. An unlimited number of fluids including oil, grease, DEF, windshield wash fluid, and anti-freeze. Typical applications include large dealerships, heavy-duty fleet/truck/bus facilities, industrial, mining and construction.
Diesel Exhaust Fluid (DEF)
Designed specifically to handle DEF, the true blue systems and provide direct dispense from IBC totes, drums and pipes systems for dealerships, garages, fleets and commercial facilities. These packages are designed to make DEF refills convenient for technicians and drivers.
DEF Packages do not include coupler systems.
You must choose a coupler kit to create a complete system for your fluid distribution needs
WE ARE A CERTIFIED ABI INSTALLER